J/Boats J/88, Руководство пользователя

Страница: 42 / 58

J88 OWNER MANUAL 42

Galvanic Isolator : This device is a “fail safe” isolator designed to isolate any low voltage stray
current on the AC circuit. Please refer to the specific manual included with the boat for more
information.

Residual ELCI Current Circuit Breaker: Located in line between the dockside power inlet and the
galvanic isolator.

Outlet: located in the cabin supplies power for 110 AC accessories.

Ground Fault Systems: There is a single ground fault system on the J/88 that protects all AC
outlets.
Informational Instructions for Shore Power

Do not modify the craft's electrical systems or relevant drawings. Installation, alterations and
maintenance should be performed by a competent marine electrical technician. Inspect the system
regularly.

Disconnect shore-power connections when the system is not in use.

Connect metallic housings or enclosures of installed electrical appliances to the protective conductor
system in the craft.

Use double insulated or grounded (earthed) electrical appliances.

If the reverse polarity indicator is activated, do not use the electrical system. Correct the polarity fault
before activating the electrical system on the craft.

WARNING — Do not allow the shore-power cable end to hang in the water. An electrical field
can be caused which can cause injury or death to nearby swimmers.

WARNING — To minimize shock and fire hazards:
-
Turn off craft's shore-power connection switch before connecting or disconnecting shore-power
cable.
-
Connect shore-power cable to craft’s inlet before connecting to shore-power source.
-
Disconnect shore-power cable at shore-power source first.
-
If reverse polarity indicator is activated, disconnect cable immediately.
-
Close shore-power inlet cover tightly.
Do not alter shore-power cable connectors, use only compatible connectors.