J/Boats J/145, Руководство пользователя

Страница: 10 / 51

J/145 OWNER GUIDE 11
**Special Builder Instructions for Installing Additional Deck Hardware
The following instructions should be provided to owners / dealers when installing additional deck
hardware on J/145's:
1. Drill oversize holes in deck for hardware fasteners, minimum of twice the fastener diameter
(e.g. drill min. 3/4" hole for 3/8" diameter fastener).
2. Fill oversize fastener holes with epoxy putty, and allow to cure.
3. Redrill fastener holes through cured epoxy to correct size.
4. Install fasteners with large washers or backing plates.
Following these instructions will prevent crushing the Airlite foam in areas of the deck where (high
density Penske Extreme 2000) provisions were not made for hardware installation.