J.ASSY VISUM Monitor, Руководство оператора

Страница: 5 / 42

VISUM |
5
Installation | Visum
TIP:
• Do not install the sensor
flat. This will cause sensor
wake up issues.
The sensor is installed between the diffuser/air release and the
fertilizer outlet hose:
4
”
2
”
3
4
”
2
16
”
Choose the correct inlet and outlet coupler
for the hose and diffuser diameters.
ASSEMBLY
1. Cut a piece of the hose at the diffuser side with the
length of the sensor-coupler assembly, so that the total
length will be the same as the original hose.
2. Place the sensor with the
internal antenna facing
“up”
or “skyward”. The internal
antenna is located to the left
of the square patch with “P”
and “L” between the “J” and
“A” of the word J. Assy. See
illustration.
TIP:
• Do not bend the couplers to install
in your system. That can increase
clogging or release during use.