J.ASSY VISUM Monitor, Руководство оператора

Страница: 16 / 42

16
| J.ASSY
The confirmation of a new selected level is made after the
user clicks
After the confirmation click, the monitor should present
the selection confirmed
by presenting the text “OK” and
going to the initial screen.
When changing the brightness, the monitor will show
the selected LED brightness showing the fertilizer
LED in Green and the seed LED in Red.
Brightness changes can be made thru the options
below:
B1: Low level
B2: Medium level (factory default value)
B3: High level
F4 | Check sensor ID
When entering the screen, the two decimal points on
the display will show and the two LEDs in white will
be lit, after 1 second the display will blink and the
central segments of the two displays will blink every 1
second:
“-“ and “-”, both LEDs remain lit in white.
When entering the function, the monitor should start the
process of requesting a radio ID, asking for the ID every
1 second.
In this mode, the user needs to bring the magnet closer
to the sensor to perform the reading.
OUTPUT CONDITIONS:
The user can cancel the process at any time by
pressing for 5 seconds.
If the user does not choose or cancel the
function, it will exit automatically in 60 seconds
and maintain the previous adjustment.