J. A. Roby FORGERON, Инструкция по эксплуатации

Страница: 3 / 30

3
March 1 st , 2015
Introduction
Read all instructions carefully before install your new J. A. ROBY wood stove. A good installation is very important for a safe and effective
use of J. A. ROBY INC stove. In the doubt about the instruction step to install your appliance correctly, we suggest to call a professional
master installer. A wrong installation may result with a fire, burns and possible death.
Keep these instructions.
This appliance must be connect to
•
A HT type factory-built chimney approved UL103 or ULC 629 with 6 inches diameter (15.24 cm)
•
A code-approved masonry chimney with a flue liner with a 6 inches diameter (15.24cm)
N.B: Be warned that the local’s codes and rules can have more specific requirement than this manual. You can consult a master installer,
fire officials or local building about restriction and installation inspection in your area and to determine if you need to obtain a permit
DO NOT CONNECT THIS APPLIANCE TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE