background image

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

IXXAT 

Headquarter

 

US Sales Office

 

IXXAT Automation GmbH 

IXXAT Inc. 

Leibnizstr. 15 

120 Bedford Center Road 

D-88250 Weingarten 

USA-Bedford, NH 03110 

 

Tel.: +49 (0)7 51 / 5 61 46-0 Phone: 

+1-603-471-0800 

Fax: +49 (0)7 51 / 5 61 46-29 

Fax: +1-603-471-0880 

Internet: www.ixxat.de 

Internet: www.ixxat.com 

e-Mail: [email protected] 

e-Mail: [email protected]

 

 
 
 
 

Support

    

In case of unsolvable problems with this product or other IXXAT products 

please contact IXXAT in written form by:   

  

Fax: +49 (0)7 51 / 5 61 46-29 
e-Mail: [email protected]

 

 
 
 
 

Copyright 

Duplication (copying, printing, microfilm or other forms) and the electronic 

distribution of this document is only allowed with explicit permission of 
IXXAT Automation GmbH. IXXAT Automation GmbH reserves the right to 
change technical data without prior announcement. The general business 

conditions and the regulations of the license agreement do apply. All rights 
are reserved.

 

 
 
 
 

Document number: 4.01.0045.20000 

Version: 2.3

 

 

Содержание iPC-I 165



















Отзывы: