CAN@net II/Generic, Version 1.5
Bridge Configuration Example
33
For a functional bridge configuration, the following steps must be done:
(1) Basic configuration of the Server (See Chapter 3.2 Basic device
configuration).
The IP setting of the Server should be :
IP address:
192.168.10.101
Subnet mask:
255.255.255.0
Gateway address:
0.0.0.0
(2) Basic configuration of the Client (See Chapter 3.2 Basic device
configuration).
The IP setting of the Client should be :
IP address:
192.168.10.100
Subnet mask:
255.255.255.0
Gateway address:
0.0.0.0
(3) Devices must be connected to the Ethernet network and must be reset.
Connect to the Client web interface with any Internet browser with
enabled JavaScript, typing
http://192.168.10.100
in the address field
(URL).
(4) Go to the Device Configuration page (See Chapter 5) and enter
appropriate values in
Configuration client
section (step 2 of the bridge
configuration page):
Server device address:
192.168.10.101
Server baudrate:
100
Client baudrate:
250
(5) Store the new values into the device flash memory by entering the device
password and pressing the
Submit
button in step 3 and 4 of the device
configuration page.
(6) Reset or reboot the Client device.
