IWILL dca200, Руководство пользователя

Страница: 60 / 83

Chapter 5 BIOS Setup
60
DCA200-N Series
changing the connection on the cable.
Options Enabled
Disabled (*)
5.4.9 Boot Up Floppy Seek
Seeks disk drives during boot up. Disabling speeds boot up.When enable ,the BIOS
will check the flooy drive status during boot up.
Options Enabled (*)
Disabled
5.4.10 Boot Up NumLock Status
This field determines the configuration of the numeric keypad after system boot up.
Options Description
On (*) Keypad works as number keys
Off Keypad works as arrow keys
5.4.11 Gate A20 Option
This field configures how the gate A20 is handled. The gate A20 is a device used to
address memory above 1 MB. At first, the gate A20 was handled from a pin on the
keyboard. While some keyboards still provide this support, it is more common, and
much faster, for modern system chipsets to provide support for gate A20.
Options Description
Fast (*) GateA20 signal supported by core logic
Normal GateA20 signal supported by keyboard controller
5.4.12 Typematic Rate Setting
This field determines if the typematic rate is to be used. When enabled, the BIOS will
report (after a moment) that the key has been depressed repeatedly. When disabled,
the BIOS will report only once if a key is held down continuously.
Options Enabled
Disabled (*)
5.4.13 Typematic Rate (Chars/Sec)
When Typematic Rate Setting enabled, this field specifies how many characters will
be displayed in one second when a key is held down continuously.
Options 6 (*), 8, 10, 12, 15, 20, 24, 30
5.4.14 Typematic Delay (Msec)
When enabled, typematic delay allows you to select the time delay between when the
key is first pressed and when the acceleration begins.