iWeld MIG 520 COOLPULSE, Руководство пользователя

Страница: 25 / 32

HU
EN
5. Welding parameters table
The option of the welding current and welding voltage directly influences the welding
stability, welding quality and productivity. In order to obtain the good welding quality,
the welding current and welding voltage should be set optimally. Generally, the setting
of weld condition should be according to the welding diameter and the melting form as
well as the production requirement.
The following parameter is available for reference.
5.1. Parameter for butt-welding (Please refer to the following figure.)
Plate
thickness
t (mm)
Gap
g
(mm)
Wire
Ø
(mm)
Welding
current
(A)
Welding
voltage
(V)
Welding
speed
(cm/min)
Gas
volume
(l/min)
0.8 0 0.8~0.9 60~70 16~16.5 50~60 10
1.0 0 0.8~0.9 75~85 17~17.5 50~60 10~15
1.2 0 1.0 70~80 17~18 45~55 10
1.6 0 1.0 80~100 18~19 45~55 10~15
2.0 0~0.5 1.0 100~110 19~20 40~55 10~15
2.3 0.5~1.0 1.0 or 1.2 110~130 19~20 50~55 10~15
3.2 1.0~1.2 1.0 or 1.2 130~150 19~21 40~50 10~15
4.5 1.2~1.5 1.2 150~170 21~23 40~50 10~15
5.2. Parameter for flat fillet welding (Please refer to the following figure.)
Plate
thickness
t (mm)
Gap
g
(mm)
Wire
Ø
(mm)
Welding
current
(A)
Welding
voltage
(V)
Welding
speed
(cm/min)
Gas
volume
(l/min)
1.0 2.5~3.0 0.8~0.9 70~80 17~18 50~60 10~15
1.2 2.5~3.0 1.0 70~100 18~19 50~60 10~15
1.6 2.5~3.0 1.0 ~ 1.2 90~120 18~20 50~60 10~15
2.0 3.0~3.5 1.0 ~ 1.2 100~130 19~20 50~60 10~20
2.3 2.5~3.0 1.0 ~ 1.2 120~140 19~21 50~60 10~20
3.2 3.0~4.0 1.0 ~ 1.2 130~170 19~21 45~55 10~20
4.5 4.0~4.5 1.2 190~230 22~24 45~55 10~20
25