i
Wave GPS Module User Manual
REL1.9
iWave Systems Technologies Pvt. Ltd.
Page 26 of 29
(Confidential)
101—Navigation Initialization:
This command is used to initialize the Evaluation Receiver by providing current position (in X,
Y, Z coordinates), clock offset, and time. This enables the Evaluation Receiver to search for the
correct satellite signals at the correct signal parameters. Correct initialization parameters enable
the Evaluation Receiver to acquire signals quickly.
Table 14 contains the input values for the following example:
Start using known position and time.
$PSRF101,-2686700,-4304200,3851624,96000,497260,921,12,3*1C
Table 14: Navigation Initialization Data Format
Table 15: Reset Configuration - Non SiRFLoc Platforms
102—Set DGPS Port:
Not supported in iWave GPS module