- 31 -
Operation
4) Set the dividing ratio or multiply ratio
ON
STROKE RATE
Use or key to set the dividing ratio or multiply ratio in the
setting display.
5) Return to the EXT mode
ON
STROKE RATE
Push
key to return to the EXT mode.
2-3-6. Display selection mode of EXT operation
1) Turn on power
ON
STROKE RATE
When power is turned on for the first time, program version is
shown briefly and the manual waiting mode appears. On and after
the second time the pump is turned on, the pump restarts in the
EXT operation mode with "EXT" indication on the display if the
pump was in EXT operation mode at the last power-off.
If "STOP" or "-STOP" indication is displayed, the STOP function
is active. First, release the STOP function. Refer to P.35 for how to
release the STOP function.
2) Move to the EXT mode
ON
STROKE RATE
Push key as pressing in the manual waiting mode to move
to the EXT mode. Do not input any signals at this phase.
