- 9 -
Installation
● Banned solutions
• Halogenated hydrocarbons such as
trichloroethylene and carbon tetra-
chloride
• Ether and low-grade ester
• Slurry (Never use slurry, which
wears out the pump bearings.)
● A strong magnet is inside the pump.
Do not use the pump with any liquid
which contains metals such as iron
and nickel.
●
Do not pull or knot a power cable or
place a heavy stuff on it. Damage to
a power cable could lead to a fire or
electrical shock.
● Do not use any damaged pump. Using
a damaged pump may lead to an elec-
tric leak or shock.
CAUTION
Do not install or store the pump in the
following places:
1. Where ambient temperature
exceeds 40
°
C or falls below 0
°
C.
2. In a dusty/humid place.
3. Under direct sunlight or wind &
rain.
●
Install the pump as close to a supply
tank. Keep a liquid level in the tank
higher than the pump at any time.
●
An electrical failure of the pump may
result in electric shock. Purchase and
install an earth leakage breaker sepa-
rately.
Nickel
Iron