WPS is designed to ease set up of security Wi-Fi networks and subsequently network management. This router supports
WPS features for AP mode, AP+WDS mode, Infrastructure-Client mode, and the wireless root interface of Universal
Repeater mode.
Enable WDS:
Check this box to enable WDS function.
MAC Address:
Enter the remote AP MAC address.
Data Rate:
Sets the maximum wireless data rate that your network will operate on.
Comment:
You can add some comment for this item.
3.4.5 WPS
Status
Internet Setting
Wireless Setup
Basic
Security
Access
WDS
WPS
Schedule
Firewall
Security
QoS
System
Advanced
Logout
Wireless Access Control
This page allows you to setup the wireless security for WDS. When enabled, you must make sure each WDS device has adopted the
same encryption algorithm and key.
Current WDS AP List :
MAC Address :
Tx Rate (Mbps)
Comment :
Select
Reset
Delete All
Delete Selected
Enable WDS
MAC Address :
Data Rate
Comment :
Auto
Reset
Show Statistics
Apply
Set Security
Status
Internet Setting
Wireless Setup
Basic
Security
Access
WDS
WPS
Schedule
Firewall
Security
QoS
System
Advanced
Logout
Wi-Fi Protected Setup
This page allows you to change the settings for WPS (Wi-Fi Protected Setup). Using this feature allows a wireless client to automically
syncronize its settings and easily and securely connect to the Access Point.
Disable WPS
Auto-lock-down state :
Self-PIN Number :
Push Button Conguration:
STOP WSC :
Client PIN Number :
Stop WSC
Start PIN
Reset
Apply
WPS Status :
Congured
UnCongured
Reset to UnCongured
Unlock
Start PBC
26843520
Current Key Info :
Authentication
WPA2-Mixed PSK
Encryption
AES
Key
12345678
Disable WPS:
Check this box and clicking “Apply” will disable WPS function. WPS is turned on by default.
Self-PIN Number:
It is AP’s PIN.
Client PIN Number:
The length of PIN is limited to four or eight numeric digits. If the AP and Station input the same PIN
and click
“Start PIN”
button in two minutes, they will establish connection and setup their security key.
20
