1.5.2 Button & Ports
WAN:
10/100Mbps RJ45 port. The WAN port is where you will connect Cable/xDSL Modem or other LAN.
LAN (1,2,3,4):
These four LAN ports are where you will connect networked devices, such as PCs, print servers, remote hard
drives, and anything else you want to put on your network. If you connect this product with the Hub (or Switchboard)
correctly, the router's and hub's (or the switchboard's) corresponding LED must illuminate.
WPS:
With the router powered on, press the button about 2 second, it is WPS function and the WPS LED will flash 2
minutes.
RESET:
The Reset Button has two functions, WPS and Factory Default. With the router powered on, When selecting the
WPS function, use a pin to press and hold the button about 2 seconds, the WPS LED will flash 2 minutes. For the other one,
use a pin to press and hold the button about 6 seconds, the router will restore to factory default.
POWER:
The Power socket is where you will connect the power adapter. Please use the power adapter provided with this
router.
Wireless antenna:
To receive and transmit the wireless data.
Description of buttons and ports
The following parts are located on the rear panel.
1
2
3
4
WAN
RESET
POWER
1.5.3 Label on the Bottom
1. Default IP address of the router. You can use the IP address to access the router web UI.
2. MAC address of the router. Each router has a unique MAC address.
3. The default WiFi name iVOOMi Speed 600
03
Model
Power
Default Access
For support and warranty, please visit: www.ivoomi.co
Customer Care Number :
+91-9335828282
Username
Password
FCC ID : 2AA6ZCR2
admin
admin
:
:
Speed 600 (IV-600R)
5V~ 1.0A
192.168.0.1
:
:
:
Serial
Number
MAC
Address
SSID
S/N : XXXXXXXXXXXXXXX
MAC : XXXXXXXXXXXXXXX
SSID : iVOOMi_Speed 600
Password :
No Password