manualshive.com logo in svg

Ivoclar Vivadent Programat EP3010, Руководство по эксплуатации

Поделиться
Скачать
Ivoclar Vivadent Programat EP3010 Скачать руководство пользователя страница 60

60

6. Practical Use

6.3  Press procedure using an Ivoclar Vivadent press program

Step 1: 
Switch the furnace on.

Switch the furnace on using the mains switch at the back of the  
furnace. Subsequently, the furnace conducts an automatic self-test.

Wait until the furnace has reached the pre-set stand-by temperature.

Step 2: 
Select the operating mode. 

After the self-test has been completed, the selection of the operating 
modes is displayed. Select the operating mode "Pressing".

Step 4:
Select the desired investment ring size.

Depending on the program selected, up to three different  
investment ring sizes can be chosen (100 g / 200 g / 300 g). Not all 
programs can be run with all the investment ring sizes. Please also 
refer to the Instructions for Use of the respective material.

Step 3: 
Select the program.

Press the 

[Ivoclar Vivadent Programs] 

button.

Select the desired program.

Содержание Programat EP3010

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды