manualshive.com logo in svg

Ivoclar Vivadent Programat EP3010, Руководство по эксплуатации

Поделиться
Скачать
Ivoclar Vivadent Programat EP3010 Скачать руководство пользователя страница 51

51

2. Conduct the software update. 

If the USB stick with the software file is already connected, the  
furnace automatically searches for a valid software file. If the USB 
stick has not yet been connected with the furnace, do so now.
Press the 

[Execute] 

button.  

3. The status bar shows the progress of the update. 

 

4. Complete the software update. 

Software update successful

 Software update failed

   The furnace has to be switched off and on again by means of the mains switch at the rear of the furnace (24) to 

complete the software update.

  Important information

 

 Please note that modified Ivoclar Vivadent programs may be overwritten during a software update. Individual 
programs are not affected and will not be overwritten.

5.5.5  Software update

Software updates can be easily installed on the furnace by means of a USB stick. A USB stick which contains the current 
software file (e.g. EP 3010_V1.10.iv) is required for the update. The software version on the USB stick must be higher than 
the one installed on the furnace (see Selection – Information).

The free software updates for Programat furnaces are available from 

www.ivoclarvivadent.com/downloadcenter

. 

  Back-up your data before performing a software update.

A software update requires only few steps:

1. Open the Software Update menu.

Scroll to page 4 in the home screen and press the 

[Software Update]  

button.

5. Operation and Configuration

Содержание Programat EP3010

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды