Ivoclar digital PrograPrint Clean, Краткие инструкции

Страница: 16 / 58

English
16
2.7 Safety instructions for potential hazard areas
2.7.1 Magnetism
The inductive drive of the magnetic mixing rod works with magnetism.

Keep pacemakers, data carriers, magnetic cards and other devices that may be affected by
magnetic fields away from the device.
2.7.2 Electrical safety
If covers are opened or parts are removed which are only accessible with tools, voltage-
carrying components may be exposed. The plugs may also be under voltage. There is a risk of
electric shock.

Electrical work must only be carried out by your authorized service partner.

Before connecting the device, check that the supply voltage and frequency are correct at
the point of installation (see electrical data and the information on the type plate in the
Operating Instructions, “Documents of equal applicability”, page 8).

To avoid injury to the user and for cooling reasons and fire protection, never remove the
housing covers.

For installation, observe the requirement of the manufacturer for house installation
(“Documents of equal applicability”, page 8).

To prevent the risk of electric shock, connect the device only to a power supply with a
protective conductor.

The mains plug is used as a supply circuit disconnecting means. Always connect the mains
plug to an easily accessible protective contact socket.

Connect the grounded and freely accessible protective contact socket to a separately
secured circuit.

Make sure that the protective contact socket is equipped with a residual current circuit
breaker (FI).

Connect the device to a separately secured circuit or make sure that no devices are
connected that cause severe supply voltage fluctuations when switched on. These
fluctuations interfere with the electronic controls and may cause failure of the system.

Disconnect power before cleaning and maintenance work approved to be performed by
the user.

If you need to disconnect the unit from the power supply at a later time: Disconnect the
plug from the protective-contact mains socket, not on the device.