Ivoclar digital PrograPrint Clean, Краткие инструкции

Страница: 9 / 58

English
9
2 Safety
WARNING! Improper use of the device.
Hazard to the user.

The safety chapter contains important information on the safety of the device: Please read
it thoroughly prior to installation and operation.
The device is built according to state-of-the-art technology and recognized safety regulations.
Nevertheless, operation bears the risk of injury of the user or third parties. Moreover,
impairments of the device and other property are possible.
2.1 Intended use
PrograPrint Clean has been designed for cleaning the dental objects produced by the
PrograPrint PR5 in the following materials:
• ProArt Print Wax (burn-out material for the press and casting technique)
• ProArt Print Model (material for the fabrication of the dental working models)
• ProArt Print Splint (material for the fabrication of dental drilling templates and splints)
Use PrograPrint Clean exclusively for this purpose.
In the case of damage caused by improper use or failure to observe the Operating Instructions,
all liability and guarantee claims are void.
PrograPrint Clean is for cleaning with isopropanol according to the following properties:
• It must have a purity of at least 99.8%
• It must be suitable for cleaning medical products
Please note that only the materials and cleaning agents approved by the manufacturer ensure
processing without damage to the machine.
All information regarding material and indication extensions corresponds to the state of
knowledge at the time of printing. For additional details, go to:
http://www.ivoclarvivadent.com
It is not recommended to clean materials from other manufacturers as they have different
material-specific processing parameters and this can have a negative effect on the precision
and material properties of the printed objects.