![background image](http://html1.mh-extra.com/html/ivision/iv-wp866pl/iv-wp866pl_user-manual_2097590020.webp)
- 19 -
◆
Manual focus approach can be adopted to configure preset positions for distant objects, that is, after adusting the lens
to focus on distant place, control the keys “FOCUS+”and “FOCUS-”on the controlling keyboard to configure optimal focal
image storage to avoid fuzzy images resulting from the interference of other distant objects.
7.2.2 Invoke Preset Positions
The function enables the IR Low-speed Dome Camera to quickly return to the preset position.
Enter the number(1
~
64) key for preset position number which you need to invoke, the LED displays the preset position
number. Then, press the “PREVIEW” key. The IR Low-speed Dome Camera will return to the preset position.
e.g. Invoke the No.1 preset position
a. Enter “1”
b. Press “PREVIEW” key
7.3 Configure and run tour groups
The tour group function is to group some preset positions together, if the user wants to invoke these preset positions,
with only one external order, the IR Low-speed Dome Camera will automatically invoke the preset positions in the group
one by one. The dwelling time at each preset position can be set within 1-255 seconds. Up to 16 preset positions can be
saved in each tour group. And at most 4 tour groups can be configured. The operation is as below:
A. In the keyboard initial state, enter number “140”(110) and press the “PREVIEW” key to enter the tour configuration.
B. After entering the configuration, add preset position number to the tour. Enter the first desired preset position number
and press the “PREVIEW” key, and the first preset position is successfully added. Then goes the second one. Enter the
second desired preset position number and press the “PREVIEW” key, and the second preset position is successfully
added. More preset positions can be added in the same way.
C. After all the required preset positions having been added in the tour, enter the number “141”(111) on the keyboard and
press the “PREVIEW” key to exit the tour configuration.
D. Start Running a Tour:
In the keyboard initial state, enter number “142”(112) and press the “PREVIEW” key to start
running the preset tour.
Example:
Configure the tour order to be 1→2→5→3→4→6 (please configure preset positions before tour configuration)
1. Invoke “preset position” 140(110) to enter tour configuration (Enter number “140”(110) and press the “PREVIEW” key)
2. Invoke preset position 1 to configure the first tour position (Enter number “1” and press the “PREVIEW” key)
3. Invoke preset position 2 to configure the second tour position (Enter number “2” and press the “PREVIEW” key)
4. Invoke preset position 5 to configure the third tour position (Enter number “5” and press the “PREVIEW” key)
5. Invoke preset position 3 to configure the fourth tour position (Enter number “3”and press the “PREVIEW” key)
6. Invoke preset position 4 to configure the fifth tour position (Enter number “4”and press the “PREVIEW” key)
7. Invoke preset position 6 to configure the sixth tour position (Enter number “6”and press the “PREVIEW” key)
8. Invoke “preset position” 141(111) to finish tour configuration (Enter number “141”(111) and press the “PREVIEW” key)
9. Invoke “preset position” 142(112) to start running the tour, and the IR Low-speed Dome Camera runs the tour and
begins to cruise in the order of 1→2→5→3→4→6.
If other devices are used to control the IR Low-speed Dome Camera, due to the protocol limitation, some special