![background image](http://html1.mh-extra.com/html/iveco/rl4-ucon7-500/rl4-ucon7-500_installation-manual_2097257003.webp)
Connections
Reverse-IN
should be
connected to
reversing light
Connect the
purple wire
“
Manual ACC
”
to
the car ACC
。
Connect BATT and
GND to the original
car.
Connect the two ribbons to the two sockets on
the external PCB. The external PCB sockets are
signed OUT and IN. Connect the ribbon IN to the
socket IN and ribbon OUT to socket OUT
(
the
ribbon connected to the 40pin external PCB is IN).
The PCB installation will show how to connect the
ribbons and boards
。
Small buttons to switch
video by long or short
press