Installation Procedure
1
、
IVECO 7inch Monitor HU and one external
PCB, one LVDS Cable.
2
、
Remove screws, then the rear can be
opened.
3
、
Pay attention to take the OEM ribbon from
the Monitor as the above picture shows.
4
、
Put the OEM ribbon to the external PCB
and connect interface
’
s 200mm ribbon connect
to OE socket .
5
、
Extend the two ribbon from the Head Unit
gap, fix the ribbon to the Head Unit by
tape.
6
、
Remove the screws and put our external
PCB on the HU, then fix the external PCB by
the screws as the above picture shows.
