Operator Usage Guide
The starting point to initiate a load weighing procedure are
* Indicator power switch must be turned ON.
* Loaded forks must be lowered to ground.
* LED display must show
Mode 8
digit
System ready to be used
*
With loaded forks on the ground and LED
Display will show
Mode 8.
* A
ctivate and hold
lift control switch until
loaded forks are automatically stopped at
pre determined forks height.
*
During the measurement cycle LED Display will
go blank for moment
* System is calculating the load weight value
* Within few seconds LED Display will show the
load weight (
Our example 583
)
* Depending on system set up / application the
value could be in pounds or kg.
Integrated Visual Data Technology Inc. 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7
System Power Switch
Note 1. When weighing function is not used turn Power Switch OFF.
Note 2: Short power interruption to lift solenoid during measurement can be seen on some controllers as a “fault”.
