Page 3
Operation and Maintenance
NEW EcoCooler
DSKE.191101.01.EN
Continuous product development may give rise to specification changes without notice.
1 General
1.1 Intended use
The EcoCooler cooling unit is designed for cooling supply air in buildings (com-
fort cooling). The unit is designed to be installed together with IV Produkt AB air
handling units.
When installed indoors, the air handling unit must be installed in an area that
maintains a temperature b7 and +30°C, and with a moisture content of
<3.5 g/kg in the fan room in winter. The unit can also be equipped for outdoor
installation.
Any other use and installation in other environments is prohibited unless specifi-
cally permitted by IV Produkt AB.
1.2 Safety regulations
For safety regulations relating to the cooling unit installed together with the En-
vistar Flex air handling unit, see Operation and Maintenance for Envistar Flex,
under order-specific documentation at
1.3 Manufacturer
The EcoCooler cooling unit is manufactured by:
IV Produkt AB
Sjöuddevägen 7
SE-350 43 VÄXJÖ
1.4 Designations
The EcoCooler comes with a model rating plate placed on the front.
The model type plate shows the series number and the requisite designations to
identify the unit.
0409
Cooling unit
Order number
Code Key
Model
Name of project
Date of manufacture
PS Max allowable pressure
PT Test pressure
TS Temperature range
Protection level - low
Protection level - high
Refrigerant / Fluid group
GWP
Refrigerant charge Circuit 1
Refrigerant charge Circuit 2
IV Produkt AB
VÄXJÖ, SWEDEN
Contains fluorinated greenhouse gases
covered by the Kyotot protocol.
bar (e)
bar (e)
°C
bar (e)
bar (e)
kg
kg
ton CO
2
e
ton CO
2
e
Typical model identification label
