IV Produkt Envistar Flex 060 Скачать руководство пользователя | Manualshive

Страница: 5 / 58

background image

Page 1

Operation and Maintenance

Envistar Flex

DSEF191101.05.EN

Continuous product development may give rise to specification changes without notice.

1 Safety precautions

Follow all safety precautions in this document and pay attention to all warning

signs on the air handling unit.

Failure to comply with the safety precautions may result in injury to persons or

damage to air handling units.

1.1 Personal protective equipment

Personal protective equipment must always be used based on the risks present

at the workplace. Comply with national and local laws and regulations.

The following personal protective equipment is recommended where the work

requires:

•   Protective shoes with steel cap
•   Hearing protectors
•   Safety helmet
•   Gloves
•   Goggles
•   Covering clothing
•   Protective overalls
•   Mouthguard/protective mask
•   Fall protection

1.2 Prevent injury to personal or damage to air handling units

To avoid injury to persons or damage to air handling units, pay attention to the

following:

•   Read the entire document before working on the unit.
•   Comply with national and local laws and regulations for work safety.
•   Do not wear loose clothing or jewellery that may get fasten.
•   Do not step or climb on the heater.
•   Use recommended tools and equipment intended for the job.
•   Use recommended personal protective equipment when the work requires it.
•   Observe the unit's product signs, information and warning stickers.
•   Keep the unit clean and follow operating and care instructions.
•   Make sure that all covers are in place and that inspection covers are closed.
•   Lockable inspection covers must be locked before starting the unit and after

maintenance/service.

• Use appropriate fall protection when working at heights - normally over 2

meters. Even work at lower heights may require protective measures.

«
...
3
4
5
6
7
...
»

Содержание Envistar Flex 060



























































Отзывы:

Нет отзывов

Похожие инструкции для Envistar Flex 060

Бренд: Rapid Страницы: 162

Бренд: Haier Страницы: 32

Бренд: Haier Страницы: 40

Бренд: Haier Страницы: 16

Бренд: Haier Страницы: 28

Бренд: Haier Страницы: 17

Бренд: Haier Страницы: 18

Бренд: Haier Страницы: 16

Бренд: Haier Страницы: 15

Бренд: Haier Страницы: 16

Бренд: Flexit Страницы: 2

Бренд: Flexit Страницы: 24

DOMEKT C8 automation

Бренд: Komfovent Страницы: 44

Бренд: PM-LUFT Страницы: 22

Бренд: Daikin Страницы: 12

Бренд: Dantherm Страницы: 170

Бренд: Amana Страницы: 32

Бренд: Lennox Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды