Haier HB2400VD2M20 Скачать руководство пользователя

Страница: 1 / 16

13 SEER 2 3 4 5 Ton

Installation & Operation Manual

Air Handler

WARNING

WHEN THIS APPLIANCE IS INSTALLED IN AN ENCLOSED AREA, SUCH AS

A GARAGE OR UTILITY ROOM, WITH ANY CARBON MONOXIDE PRODUCING

DEVICES (i.e. AUTOMOBILE, SPACE HEATER, WATER HEATER,ETC.) INSURE

THAT THE ENCLOSED AREA IS PROPERLY VENTILATED.

WARNING

CARBON MONOXIDE (REFERED TO AS CO) CAN CAUSE PERSONAL INJURY

OR DEATH

WARNING

FAILURE TO FOLLOW THESE INSTRUCTIONS, LOCAL CODES OR NATIONAL

CODES MAY CAUSE FIRE, EXPLOSION, ELECTRICAL SHOCK, PERSONAL

INJURY OR PROPERTY DAMAGE.

FOLLOW ALL LOCAL CODES. IN THE ABSENCE OF LOCAL CODES REFER TO :

NATIONAL ELECTRICAL CODE NFPA 70

NFPA 90A & 90B
UNIFORM MECHANICAL CODE

READ THESE INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING TO INSTALL
OR SERVICE THIS APPLIANCE.

ONLY FACTORY AUTHORIZED KITS OR ACCESSORIES SHOULD BE USED WHEN
INSTALLING OR MODIFYING THIS APPLIANCE, UNLESS OTHERWISE NOTED IN
THESE INSTRUCTIONS.

SOME LOCALITIES MAY REQUIRE THE INSTALLER/SERVICER TO BE LICENSED.
IF IN DOUBT CONTACT YOUR LOCAL AUTHORITIES.

These instructions should be retained and kept adjacent to the unit for future reference.

MODEL # HB M20 HB

MODEL # HB V20 HB

INSTALLATION DATE

The information contained in this booklet is subject to change without notice.

No. 0010572323

M22

V22

Содержание HB2400VD2M20

















Результаты поиска

Содержание HB2400VD2M20

Отзывы:

Похожие инструкции для HB2400VD2M20

Бренды по названию

Популярные бренды

Haier HB2400VD2M20, Руководство по установке и эксплуатации

Результаты поиска

Содержание HB2400VD2M20

Отзывы:

Похожие инструкции для HB2400VD2M20

Бренды по названию

Популярные бренды