IV Produkt Envistar Flex 060 Скачать руководство пользователя

Страница: 51 / 58

Page 47

Operation and Maintenance

Envistar Flex

DSEF191101.05.EN

Continuous product development may give rise to specification changes without notice.

Cleaning

DANGER!

Risk of serious personal injury and/or damage to air handling

unit.

Read and understand the entire chapter "1.5 General safety

messages" before working on, servicing, or inspecting the air

handling unit.

1. Follow items 1-7 under

Inspection

2. Wipe the fan impeller blades to remove any coatings. Use an environmentally

friendly degreasing agent.

3. The external surfaces of the motor must be kept clean from dust, dirt and oil.

Clean with a dry cloth. In the event of heavy soiling, use an environmentally

friendly degreasing agent. The motor is likely to overheat inside if thick layers

of dirt prevent air from entering the motor to cool the stator structure.

4. Vacuum clean the air handling unit so that particles will not be blown out into

the duct system.

5. Clean the other parts in the same way as the fan impellers. Check that the

inlet cones are securely mounted.

6. Remount the fan units.

Resetting the overheat protection (For ELFF with code -EC01-)

DANGER!

Risk of serious personal injury and/or damage to air handling

unit.

Read and understand the entire chapter "1.5 General safety

messages" before working on, servicing, or inspecting the air

handling unit.

1.  Cut the power supply to the fan motor.
2.  Wait at least 20 seconds after the fan impeller has stopped rotating.
3.  Close the power supply to the fan motor.

Содержание Envistar Flex 060



























































Результаты поиска

Содержание Envistar Flex 060

Отзывы:

Похожие инструкции для Envistar Flex 060

Бренды по названию

Популярные бренды

IV Produkt Envistar Flex 060, Эксплуатация и обслуживание

Результаты поиска

Содержание Envistar Flex 060

Отзывы:

Похожие инструкции для Envistar Flex 060

Бренды по названию

Популярные бренды