IV Produkt EcoHeater, Руководство по установке

Страница: 8 / 32

Page 6
Installation
NEW EcoHeater
MEH.210501.01.EN
Continuous product development may give rise to specification changes without notice.
2 General
2.1 Intended use
The EcoHeater extract air heat pump is intended for energy recovery from the
extract air in apartment buildings.
When installed indoors, the unit must be installed in an area that maintains a
temperature b7 and +30°C, and with a moisture content of <3.5 g/kg in
dry air in the winter. The unit can also be equipped for installation in cold attics
or outdoors.
Any other use and setup in other environments are prohibited unless specifically
permitted by IV Produkt AB.
It is not permitted to use the unit in potentially explosive environments, Eex.
2.2 Manufacturer
The EcoHeater extract air heat pump is manufactured by:
IV Produkt AB
Sjöuddevägen 7
S-350 43 VÄXJÖ
2.3 Designations
The EcoHeater extract air heat pump comprises two to three sections, fan
section, compressor section and a possible combustion gas bypass.
Each section has a model identification label placed on the front.
The model identification label shows the series number and the requisite
designations to identify the section.
Art.nr. 19121-1001
Ordernr / Order No / Tilaus nr / Nr zam / Auftragsnr.
Modell / Model / Malli / Model / Modell
Produktkod / Product code / Tuotekoodi / Kod produktu / Produktcode
Aggregatbeteckning / Project / Kohde / Agregat / Bezeichnung
Tillv.ort / Made in / Valmistettu / Produkcja / Herst.Ort
Tillv.m / Manuf.m. / Valmistus. k / Miesiav pr / Herst.Monat
Typical model identification label