ITW Trans Tech Aero 60, Руководство оператора

Страница: 21 / 43

Aero 60/90
Setup
1.5
Release 2.0 PAGE 21
1.5.7. Pad Delay
1.5.8. Cycle Delay
FRONT DELAY – causes printer to stop in the front
and up position after printer has picked up ink but
before it has printed the part.
REAR DELAY – causes printer to stop in rear and up
position before the printer has picked up ink
Touch the button to disable/ enable PAD DELAY
Touch the cell to display a numeric keypad where the PAD DELAY can be changed.
Min. value = 0.0s,
Max. Value = 10.0s
CYCLE DELAY will delay the printer at the
end of its print cycle after the preset time
delay has occurred in Continuous mode.
Touch the button to disable/ enable CYCLE
Displays the remaining time of CYCLE DELAY
Touch the cell to display a numeric keypad where the PAD
DELAY can be changed. Min. value = 0.0s,
Max. Value = 10.0s