ITW LOVESHAW LITTLE DAVID LD7D/M, Руководство пользователя

Страница: 3 / 57

LOVESHAW an ITW Company
GENERAL SAFETY PRECAUTIONS
BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT, READ THE FOLLOWING
PRECAUTIONS CAREFULLY:
* THIS MACHINE IS EQUIPPED WITH MOVING BELTS. DO NOT PLACE HANDS NEAR THE REAR
OF THIS MACHINE WHEN BELTS ARE MOVING, AS FINGERS MAY BE PINCHED WHERE BELTS
ENTER FRAME. ALWAYS USE A ROLLER TYPE EXIT CONVEYOR AND ALWAYS REMOVE THE
BOXES AFTER THEY CLEAR THE EXIT END OF THE MACHINE
.
* FINGER GUARDS ARE PROVIDED TO MINIMIZE BELT GAP AS DRIVE BELTS WEAR .
GAP SHOULD BE 1/32” BETWEEN GUARD AND BELT.
*
OBSERVE CAUTION WHEN NEAR CARTRIDGE KNIFE OR WHEN THREADING TAPE. KNIFE IS
VERY SHARP, AUTOMATICALLY OPERATED AND IS LINKED TO THE WIPE DOWN ROLLERS.
*
DO NOT ATTEMPT TO OPEN OR WORK ON ELECTRICAL BOX, JUNCTION BOXES, OR OTHER
ELECTRICAL COMPONENTS WITHOUT FIRST DISCONNECTING POWER TO THE MACHINE.
SHOCK HAZARD EXISTS IF POWER IS NOT DISCONNECTED.
*
DO NOT BY-PASS ANY DESIGNED-IN SAFETY FEATURES SUCH AS INTERLOCKS, GUARDS
OR SHIELDS.
*
FULLY AUTOMATIC MACHINES ARE EQUIPPED WITH A REAR FLAP KICKER. DO NOT PLACE
ANY PART OF THE BODY NEAR THIS AREA WITHOUT FIRST DISCONNECTING POWER AND
AIR SUPPLY.
*
DO NOT PLACE HANDS OR BODY INSIDE CONFINES OF RANDOM TYPE MACHINES. THE
SIDE RAILS AND HEAD OPERATE AUTOMATICALLY.
*
DO NOT PLACE HANDS OR BODY INSIDE CONFINES OF UNIFORM TYPE MACHINES UNLESS
HEAD IS SECURELY LOCKED AND POWER AND AIR ARE DISCONNECTED.
*
ALWAYS DISCONNECT POWER AND AIR SUPPLY (IF APPLICABLE) BEFORE SERVICING THE
MACHINE.
*
WHEN OPERATING A SEMI-AUTOMATIC MACHINE, HOLD BOX FLAPS DOWN AT TRAILING
EDGE OF THE BOX. RELEASE HANDS AS SOON AS THE BELTS TAKE THE BOX.
*
DO NOT WEAR JEWELRY, LOOSE CLOTHING, SUCH AS TIES, SCARVES, ETC. AND LONG
HAIR SHOULD BE PULLED BACK WHEN OPERATING THE MACHINE.
*
SAFETY GLASSES SHOULD BE WORN WHEN WORKING ON OR AROUND THE MACHINE.