manualshive.com logo in svg

ITW Diagraph IJ3000, Руководство по эксплуатации, Страница: 27 / 94

Поделиться
Скачать
ITW Diagraph IJ3000 Скачать руководство пользователя страница 27

 

Integrated Valve

Section 4: Installation

5760-107 Operations Manual Rev C 

Page 19 of 86

Mounting the Photosensor

1. Position the photosensor (5760-383) upstream from the first print head. The maximum

placement distance is 81 inches from the photocell to the print head.

2. The photosensor depth range can be adjusted by turning the sensitivity potentiometer

on the back of the photosensor. The photosensor normally has a range of about 30",
but can be adjusted down to about 6". 

3. The following mounting configurations are standard with the 5760-383 photosensor kit.

The mounting bracket is included. 

Photosensor Operation

1. Ensure the photosensor is secured and

positioned perpendicular to the product. 

2. Place the product in front of the photosen-

sor as in normal operation.

3. Press and hold the white "teach" button

on the rear of the photosensor for approx-
imately 1-2 seconds.

4. The rear LED will change state and stay

on after it has been "taught".

5. Remove the product from the photosen-

sor path. Confirm the rear LED turns off. If
the LED does not turn off, ensure there
are no other objects in close proximity to
the photosensor path.

6. The rear LED will turn on every time an

object is detected.

Conveyor

Bracketry

Print Head

LED

TEACH

BUTTON

Содержание Diagraph IJ3000































































































Отзывы:

Нет отзывов