2) Remove the louver of ice drop. (Clean as done with the curtain).
3) PULL THE COLLECTOR UPWARDS. IT IS PRESSURE MOUNTED.
4) Disassemble the nozzles and lids and clean them.
5) Disassemble and clean the main head filter. (IT IS PRESSURE MOUNTED).
6) Assemble the filter, nozzles and collector.
Cleaning of the Inlet filters
They are easily obstructed during the first days of operation, MAINLY WITH NEW PIPING
INSTALLATIONS.
Loose the hose and clean it under water.
Water Leak Control
When working on the machine, always check the water connections, status of the clamps and
hoses with the purpose of avoiding leakages and prevent damages or floods.
WATER QUALITY & WARRANTY
In areas with water hardness outside the range of 15ºF to 40ºF, water filters or descaling
systems are required to protect the ice machine. The Warranty will cease to exist if the
mentioned protective measures haven’t been applied where needed.
CAUTION:
IT IS VERY IMPORTANT WHEN REPLACING THE CONTAINER THAT
THE NOZZLES ARE PERPENDICULAR, AS IF TWISTED, THE EXTERNAL CUBES
COULD RUN OUT OF WATER.
1
CURTAIN
2
EJECTION PANEL
3
NOZZLE
4
COLLECTOR
5
PUMP FILTER
