background image

 

The machine should be connected using the power cable supplied with the 
equipment. The connection is not intended for fixed cabling.  
This appliance uses flammable refrigerant (propane),  stored  in  the unit's 
refrigeration circuit. 
For this reason, the following precautions should be followed: 

  Maintain without obstruction the openings intended for ventilation of 

the enclosure of the appliance or of the recess. 

  Do not use mechanical devices or other means to accelerate defrosting, 

using only those recommended by the manufacturer. 

  Do not damage the refrigeration circuit. 

  Do not use electrical devices inside the food compartments unless they 

have been approved by the manufacturer. 

  Explosive substances, such as aerosols with flammable propellant, 

should not be stored in this machine.

 

In case of refrigerant leakage: 

  Do not generate any flame in the vicinity of the appliance. 

  Do not operate on/off switches or plug/unplug power cables in the 

vicinity of the appliance. 

  Do not use a direct flame. 

  Ventilate the area around the appliance immediately by opening doors 

and windows. 

  Notify an authorized service technician. 

In order to assure the proper operation and efficiency of this equipment, it 
is  of  paramount  importance  to  follow  the  recommendations  of  the 
manufacturer,  SPECIALLY  THOSE  RELATED  TO  CLEANING  AND 
MAINTENANCE  OPERATIONS,  which  should  be  performed  mostly  by 
qualified personnel only.

 

CAUTION: 

Do not try to perform repairs. The intervention of non-qualified personnel, 
besides of being dangerous, could result in serious malfunctioning. In case 

IT IS MANDATORY TO GROUND THE EQUIPMENT  

To avoid possible discharges on individuals or damages to the 

equipment, the machine should be grounded pursuant local 

and/or national regulations as the case may be. 

THE MANUFACTURER SHALL BE HELD HARMLESS IN CASE 
OF DAMAGES ARISING DUE TO THE LACK OF THE GROUND 

INSTALLATION. 

SEE SECTION 4 OF THIS MANUAL 

 

 

Содержание NG R290









Отзывы: