ITT GOULDS PUMPS 3600 i-FRAME Скачать руководство пользователя | Manualshive

Страница: 6 / 147

background image

1 Introduction and Safety

1.1 Introduction

Purpose of this manual

The purpose of this manual is to provide necessary information for:

•

Installation

•

Operation

•

Maintenance

CAUTION:

Failure to observe the instructions contained in this manual could result in personal injury
and/or property damage, and may void the warranty. Read this manual carefully before instal-
ling and using the product.

NOTICE:

Save this manual for future reference and keep it readily available.

1.1.1 Requesting other information

Special versions can be supplied with supplementary instruction leaflets. See the sales contract for any
modifications or special version characteristics. For instructions, situations, or events that are not consid-
ered in this manual or in the sales documents, please contact the nearest ITT representative.

Always specify the exact product type and identification code when requesting technical information or
spare parts.

1.2 Safety

WARNING:

•

Risk of serious personal injury. Applying heat to impellers, propellers, or their retaining
devices can cause trapped liquid to rapidly expand and result in a violent explosion. This
manual clearly identifies accepted methods for disassembling units. These methods must
be adhered to. Never apply heat to aid in their removal unless explicitly stated in this
manual.

•

The operator must be aware of the pumpage and take appropriate safety precautions to
prevent physical injury.

•

Risk of serious injury or death. If any pressure-containing device is over-pressurized, it
can explode, rupture, or discharge its contents. It is critical to take all necessary meas-
ures to avoid over-pressurization.

•

Risk of death, serious personal injury, and property damage. Installing, operating, or
maintaining the unit using any method not prescribed in this manual is prohibited. Prohib-
ited methods include any modification to the equipment or use of parts not provided by
ITT. If there is any uncertainty regarding the appropriate use of the equipment, please
contact an ITT representative before proceeding.

1 Introduction and Safety

4

Model 3600 i-FRAME API610 11th Edition / ISO 13709 2nd Edition to current API BB3 Multi-Stage, Axially Split Installa-

tion, Operation, and Maintenance Manual

«
...
4
5
6
7
8
...
»

Содержание GOULDS PUMPS 3600 i-FRAME




















































































































































Отзывы:

Нет отзывов

Похожие инструкции для GOULDS PUMPS 3600 i-FRAME

Altherma 3 H MT ECH2O

Бренд: Daikin Страницы: 24

Altherma 3 H MT ECH2O

Бренд: Daikin Страницы: 68

Бренд: Daikin Страницы: 46

Бренд: Daikin Страницы: 24

Бренд: Atlas Copco Страницы: 137

Бренд: A.O. Smith Страницы: 119

Alwayzaire P3062

Бренд: Bestway Страницы: 2

Бренд: Baker Hughes Страницы: 78

Бренд: Vagner Pool Страницы: 35

DynaDrive DD60-10

Бренд: Davey Страницы: 32

Бренд: Geotech Страницы: 32

Бренд: Bock Water heaters Страницы: 62

Бренд: C.P.A. Страницы: 40

Бренд: A.O. Smith Страницы: 6

Бренд: baracuda Страницы: 14

Бренд: Rheem Страницы: 16

AquaMax Eco Expert 5300

Бренд: Oase Страницы: 20

Бренд: Sulzer Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды