SL7000 User Guide
To select the next entry in the display level list, push the display button once (short push).
To enter the display level, push the display button once (long push).
To exit this mode, hold down the display button (very long push).
After a predefined inactivity time-out period, the meter returns automatically to the normal mode.
Reset pushbutton operation
If the reset button is pushed when in this display mode, one of the following occurs:
•
if an EOB confirmation has not been selected, an end of billing event (EOB) event occurs
•
if an EOB confirmation has been selected, the meter displays any pre-configured EOB confirmation string.
To confirm the EOB event, the reset button must be pushed once (short push) while the confirmation string
is visible.
STD-DATA
On entering this display level, the LCD shows the first of the pre-selected parameters in the alternate long list and
the
ALT
annunciator icon is permanently lit.
To display the next parameter in the alternate long list sequence, push the display button once (short push).
To auto-scroll through the parameter sequence, hold down the display button.
After a predefined inactivity time-out period, the meter returns automatically to the normal mode.
Reset pushbutton operation
If the reset pushbutton is pushed when in this display mode, one of the following occurs:
•
if the displayed parameter can be modified by the user, the set mode is activated
•
if the displayed parameter cannot be modified by the user and an EOB confirmation has not been selected,
an end of billing event (EOB) event occurs
•
if the displayed parameter cannot be modified by the user and an EOB confirmation has been selected, the
meter displays the pre-configured EOB confirmation string.
To confirm the EOB event, the reset button must be pushed once (short push) while the confirmation string
is visible.
P.01 and P.02
On entering one of these display levels, the LCD shows the first parameter from its non-programmable display
list. These parameter values are dependant on the meter configuration and cannot be modified using the set
mode.
To display the next parameter in the list, push the display button once (short push).
Note:
There is no auto-scroll function in these display levels.
To exit a display level, push the display button once (long push).
After a predefined inactivity time-out period, the meter returns automatically to the normal mode.
Reset pushbutton operation
In these display levels, pushing the reset button has no effect.
MID
This display level operates in the same way as the P.01 and P.02 display levels.
