ITOH DENKI Power Moller 24 CBM-105FN, Руководство пользователя

Страница: 3 / 11

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 3 of 11
www.itohdenki.com
ITOH DENKI, USA, INC.
info@itohdenki.com 135 Stewart Road
Ph: 570.820.8811 Hanover Industrial Estates
Fx: 570.820.8838 Hanover Township, PA 18706 rev13-0314
SPECIFICATIONS
Connections
CN2
5 PIN connector
CONTROL
Male Connector on Card
WAGO #733-365
Female Connector for Wiring
WAGO #733-105
PIN Description
1 +24V DC or 0V input (RUN)
2 +24V DC or 0V input (DIR)
3 0 ~ +10V DC input (V-IN)
4 +24V DC or 0V output (ERR)
5 0V output (PLS)
Wire size:
28~20AWG
Control Wiring
Power to CN1 (24V DC) remains ON, control motor through CN2
Press down spring clamp in connector with a
small screwdriver.
Insert leads in proper order.
Lead should be stripped approx: 0.31~0.35”
WAGO connector
(included) must be
inserted and/or pulled
out carefully, so as not to
damage other parts.
NPN / PNP inputs
The card(s) are ordered with the inputs preset from the factory – ALL NPN or ALL PNP. The
model designation will show the factory preset.
•
CBM-103FN – NPN input type (Default)
•
CBM-103FP – PNP input type
Note – the output can be manually switched in the field by DIP switch SW1-6 – Output signal
type for both CN2-4