SCREW AIR COMPRESSOR OPERATOR’S MANUAL TM356-10270
English
5
Code 1641003212 - Edition 10/2020
1 SUCTION FILTER
10 AFTER COOLER
2 UNLOADER
11 OIL COOLER
3 SCREW COMPRESSOR
12 BALL VALVE
4 NON-RETURN VALVE
13 AIR OUTLET
5 AIR-OIL SEPARATOR
6 OIL
7 AIR-OIL PRESEPARATOR
8 MINIMUM PRESSURE VALVE
9 OIL FILTER
4.0 GENERAL SAFETY STANDARDS
The appliance may be used only by specially trained and authorized personnel.
Any tampering with the machine or alterations are not approved beforehand by the Manufacturer relieve
the latter of responsibility for any damage resulting from the above actions.
ATTENTION: UPSTREAM OF THE MACHINE INSTALLAN ISOLATOR KNIFE-SWITCH WITH AN
AUTOMATIC CUTOUT AGAINST CURRENT SURGES AND EQUIPPED WITH A DIFFERENTIAL
DEVICE FOR CALIBRATIONS SEE WIRING DIAGRAM ON LAST PAGE.
ALL WORK ON THE ELECTRIC PLANT, HOWERE SLIGHT, MUST BE CARRIED OUT BY
PROFRSSIONALLY SKILLED PERSONEL.
5.0 DESCRIPTION OF DANGER SIGNALS
1) FLUID EJECTION
5) HIGH PRESSURE
2)
DANGEROUS ELECTRIC
VOLTAGE
6) HOT PARTS
3) AIR NOT FIT FOR
BREATHING
7) MOVING PARTS
4) NOISE
8) FAN ROTATING
FIG. 3
9) MACHINE WITH
AUTOMATIC START
FIG. 2
5
www.itmtools.com.au
