HMPRO35 OPERATOR’S MANUAL
3
www.itmtools.com.au
PRO-36
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
3
1. GENERAL INFORMATION
1.1. Application
The PRO 35 is a drilling machine designed to drill holes with diameters of up to
35 mm to a depth of up to 52 mm
by using annular cutters.
The electromagnetic base clamps the machine to ferromagnetic surfaces. This
makes sure that the operator
is safe and the machine works correctly. A safety strap
protects the machine from falling in case of a clamping loss.
An optional vacuum pad a
llows you to clamp the machine to non
-ferromagnetic
surfaces.
1.2. Technical data
Voltage
1~ 110–120 V, 50–
60 Hz
1~ 220–240 V, 50–
60 Hz
Power
1020 W
Tool holder
19 mm (3/4″) Weldon
Maximum drilling diameter
35 mm
Maximum drilling depth
52 mm
Clamping force
surface with the thickness of 25 mm
(0.98”)
and roughness
R
a
= 1.25
9 500 N
Electromagnetic base dimensions
80 mm × 160 mm × 38 mm
Stroke
70 mm
Rotational speed with load
350 rpm
Minimum workpiece thickness
6 mm
Protection class
I
Protection level
IP 20
Noise level
More than 85 dB
Required ambient temperature
0–40°C
Weight
10 kg
