BM18A OPERATOR’S MANUAL
www.itmtools.com.au
15
BM-18
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
15
3.7.2. Replacing the radius roller
Unplug the power cord
. Rem
ove the circlip and the roller.
To i
nstall the roller, use such a numbe
r
of 1 mm, 0.5 mm, and 0.2 mm washers to
keep a small
gap between the roller and the cutting inserts.
Make sure that the roller
turn
s
freely
.
INCORRECT
×
CORRECT
✓
INCORRECT
×
(too large gap
between roller
and cutting
insert)
(collision
between roller
and cutting
insert)
