325
EN-9
6. If the reading is difficult, press the HOLD key to
hold the obtained value. To exit from this function
press HOLD key again. The analogy barograph
isn’t affected of enabling of this function.
CORRECT INCORRECT
Fig.3
7-2. AC CURRENT (ACA) MEASUREMENT
WARNING
Make sure that all the test leads are disconnected with
the meter’s terminal for current measurement.
1. Set the rotary switch to
A
~
.
2. Open the clamp and put the tested conductor in
the center of the clamp jaw.
3. The current value will be indicate on the display
with automatic detection of the appropriate range.
4. If the reading is difficult, press the HOLD key to
hold the obtained value. To exit from this function
press HOLD key again. The analogy barograph
isn’t affected of enabling of this function.
Current Flow
Current Flow
www.
.com
1.800.561.8187
