Itm B+K PRECISION 325 Скачать руководство пользователя страница 20

 

 

 

Limited One-Year Warranty 

 
 
 

B&K Precision Corp. warrants to the original purchaser that its product and the component 
parts thereof, will be free from defects in workmanship and materials for a period of one 
year from the data of purchase.   
 
 
B&K Preci sion Corp. will, without charge, repair or replace, at its’ option, defective product 
or component parts.  Returned product must be accompanied by proof of the purchase 
date in the form a sales receipt.   
 
 
To obtain warranty coverage in the U.S.A., this product must be registered by completing 
and mailing the enclosed warranty card to B&K Precision Corp., 22820 Savi Ranch 
Parkway, Yorba Linda, CA 92887 within fifteen (15) days from proof of purchase.   
 
 

Exclusions:  This warranty does not apply in the event of misuse or abuse of the 
product or as a result of unauthorized alternations or repairs.  It is void if the serial 
number is alternated, defaced or removed.   

 
 
B&K Precision Corp. shall not be liable for any consequential damages, including without 
limitation damages resulting from loss of use.  Some states do not allow limitation of 
incidental or consequential damages, so the above limitation or exclusion may not apply to 
you. 
 
 
This warranty gives you specific rights and you may have other rights, which vary from 
state -to-state. 
 
 
 
 
 
Model Number: ______________                       Date Purchased: __________ 
 

 
 
 
 
 
 
 
 
 

     22820 Savi Ranch Parkway 

Yorba Linda, CA 9288 7  

                                             714.921.9095 

714.921.6422 Facsimile

 

www.

.com

[email protected]

1.800.561.8187

Содержание B+K PRECISION 325






















Отзывы: