ILS-S810-0IR
DOC-S810-0IR-MNL Rev1.doc (9/22/2021)
Page 14 of
18
Copyright 2021 ITL, LLC
Battery Replacement
The battery can be accessed by the removing the bottom of the ILS-S810. Note that the
ILS-S810-0IR will automatically begin flashing operation under extreme low battery
conditions.
1. Remove the base screws from the base (HDW-2520-62S).
2. Slide the base out of the fixture
3. Disconnect the battery cable from the battery (HAR-S810-PWR).
4. Remove the battery screws securing the battery to the base (HDW-2510-075S).
5. Slide the battery out of the base.
6. Slide replacement battery into base.
7. Reconnect battery cable.
8. Secure the battery with battery screws and rubber washers.
9. Ensure the gasket is flush in the gasket channel (ILS-S810-GSL).
10. Slide the battery and base back into the fixture and replace the base screws
(see figure 6 for more details).
Figure 6: Battery Assembly
