RLC-201
DOC-RLC201-MNL Rev10.doc (12/18/2020)
Copyright 1999-2020 ITL, LLC
Page 7
of
15
Installation
The following section describes how to install the RLC-201 controller. The Incandescent
Beacon or LED Beacon, and Obstruction Lights (markers) should be installed according
to the manufacturer’s instructions.
Unpacking your RLC-201 Controller
Please examine the shipping containers and their content thoroughly upon receipt and
report any potential shipping damage to the carrier.
Quick Installation Guide
The quick start guide shows how to install the RLC-201 controller.
Remove RLC-201 controller from packaging material.
Mount the RLC-201 enclosure.
Install FAA type L-864 Incandescent Beacon or FAA type L-864(L) LED Beacon
per manufacturer’s instructions and FAA requirements.
Install electrical cable from RLC-201 to Incandescent Beacon or LED Beacon per
manufacturer’s instructions.
Install FAA type L-810 incandescent or FAA type L-810(L) type LED obstruction
lights per manufacturer’s instruction and FAA requirements.
Install cable from RLC-201 to L-810 obstruction lights (markers) per
manufacturer’s instructions.
Install Photoelectric Cell and socket (ITL P/N: PEC-1800-120, PEC-SOCK-000).
Install GPS Antenna (RLC-201-GUI only)
Install 120Vac line power to the RLC-201 Controller.
