RLC-201
DOC-RLC201-MNL Rev10.doc (12/18/2020)
Copyright 1999-2020 ITL, LLC
Page 9
of
15
Electrical Connections
All electrical control connections are made on P1, P2, P3 and P4 located at the bottom of
the controller. Connections for alarm relays are made on P5 and P6 located on the right
side of the controller. Typical connections for a 120VAC system are shown below.
It is the responsibility of the installer to comply with all applicable local,
state, and federal regulations for installation and operation of this device.
