15
5.
6.
7.
60
60
48
39
Slot the housing over the fully assembled Coupling and screw it into place
using Hexagon Socket Head Cap Screws DIN 912 M8x60 (T = 25 Nm).
A Gearbox is not required. Use the enclosed Hexagon Socket Head Cap
Screws DIN 912 M4x16 (0.0.672.78) or Hexagon Socket Head Cap
Screws DIN 912 M5x20 (0.0.672.77) to connect the Motor to the secured
Adapter Plate.
The clamping screw of the Coupling can be operated through the opening
in the Coupling Housing.
Basic unit
Slide Stop
The robust aluminium Slide Stop LRE 8 stops the carriage on a Linear Unit
travelling past the calculated or desired point, and also acts as a homing point
for the system. Thanks to its special shape, the Slide Stop can be used with
shafts in various diameters and fitted at any position.
Note:
When configured using item MotionDesigner
®
, most LRE-type Linear
Units from item are automatically fitted with a Slide Stop that can be moved
to a different position or removed entirely, as required. Some models, such as
Linear Units KLE, are designed in such a way that an additional Slide Stop is
unnecessary.
Slide Stop LRE 8
