ITEM LED Light Fitting 15W, Заметки по использованию и установке

Страница: 4 / 16

4
30
°
15
°
360°
32
80
550
450
LED Light Fitting 30W 80x32x550
Aluminium casing
ON/OFF switch, 2 levels, 50/100%
Fastening elements
Rated voltage: 24V DC via system socket connector
Protection class: III
Output: 30W LED Light Fitting
m = 1.7 kg
1 set
0.0.659.96
32
80
300
LED Light Fitting 15W 80x32x300
Aluminium casing
ON/OFF switch, 2 levels, 50/100%
Fastening elements
Rated voltage: 24V DC via system socket connector
Protection class: III
Output: 15W LED Light Fitting
m = 0.8 kg
1 set
0.0.659.97
LED Light Fitting 15W

Risk associated with inadequate installation:
Installation must be carried out by a trained electrician. The device must be
installed only on a suitable, level surface. Check the reliability of any fastenings
that have not been recommended by the manufacturer. Use suitable screws to
position the Light Fittings securely. The Light Fittings may fall from their mount-
ing if they are not installed properly.

Damage caused by using incorrect voltage:
The product must be connected to a power supply by a trained electrician. The
product must be connected to the power supply in accordance with the appli-
cable installation instructions. Before activating the device, check whether the
voltage of the power supply corresponds with the specified rated voltage. The
Light Fitting could be damaged or destroyed if the voltage is incorrect.
How it works
Switching the Light Fitting on and off: The Light Fitting comes with an integral
switch as standard, which is used to switch the Light Fitting on and off.
LED Light Fitting 30W

Always unplug the LED Light Fittings from the power supply before carrying out installation, cleaning or maintenance work on them.
The LED Light Fittings can be attached to Line 8 profiles using a fastening set, two plates and fastening material. These plates can be used to fasten the Light
Fitting as appropriate to the installation space available, and enable users to adjust the angle of the Light Fitting before it is fixed in place.
Installation and start-up