ITEM LED Light Fitting 15W, Заметки по использованию и установке

Страница: 10 / 16

2
Symbols, safety
Important, safety information, recommendation
Important information
CE conformity marking
Device corresponds to protection class III
(operates with safety extra low voltage, SELV)
Functional earth
Observe directions for disposal
Observe directions for disposal
Contents
General safety information
Symbols, safety 2
General safety information 2
Correct use 3
Technical Data 3
Installation and start-up 4
LED Machine Light Fitting and LED Light Fitting accessories 5
Maintenance 6
Disposal 6
Annex 7
The details and information in the installation guide are provided for the pur-
poses of describing the product and its assembly only. The information does not
discharge the user from the obligation to carry out his own assessments and
checks. It is important to bear in mind that our products are subject to a natural
process of wear and ageing. These notes contain important information that will
enable you to use the product safely and appropriately. When sold, rented out
or otherwise passed on to another party, this product must be handed over with
the installation guide. You must therefore read and follow the safety instructions
set out below.
▪
All work on and with LED Light Fitting must be performed with “safety first”
in mind.
▪
Switch off the power to LED Light Fitting before carrying out any work on it.
▪
Ensure LED Light Fitting cannot be switched on unintentionally, e.g. by
affixing warning notices at the activation point or by removing the fuse from
the power supply.
▪
Observe the regulations pertaining to accident prevention and environmental
protection that apply in the country and place of work where the product is
being used.
▪
Use only item products that are in perfect working order.
▪
Failure to use original spare parts will invalidate the product warranty!
▪
Check the product for obvious defects.
▪
Use the product only within the performance range described in the technical
data.
▪ Ensure that all the safety equipment associated with the product is present,
properly installed and in full working order.
▪
Do not alter the position of safety equipment, circumvent it or render it
ineffective.
LED Light Fitting. as described here, corresponds to the state of the art and
takes into account the general principles of safety applicable at the time this
installation guide was published. Nevertheless, failure to observe the safety
instructions and warning notices in this installation guide may result in personal
injury and damage to property. We will assume no liability for any resulting dam-
age or injury. We reserve the right to make technical changes that represent
technical advances. Keep these installation notes in a place where they can be
easily accessed by all users. The general safety information applies to the entire
lifecycle of LED Light Fitting.