6. Mount Installation
A
This monitor only includes screws which may be used when attaching the
� monitor to a VESA 75*75mm type mount. No VESA mount or mounting
accessory is included.
1. Unpack the carton, take out the upper and lower covers of Styrofoam, and lay it
flat on the desktop. Remove the top cover of Styrofoam, then take the body out of
the film-coated bag and place it in the cavity of the lower cover of Styrofoam again.
Styrofoam
During taking out the monitor,
please start from the slot on the ground side
2. As shown in the figure above, take out the wall-mounted adapter and four PM4*16
screws from the accessories, assemble them in the middle of the whole machine,
and lock them with a screwdriver. (Assembling and disassembling the screws, the
display screen cannot leave the Styrofoam to prevent the screen from breaking)
The wall-mounted adapter is assembled to the middle
of the whole machine. (fixed with PM4*16 screws in the
accessory bag)
PM4*16 screw X4
i
����
3. Do not pinch the screen directly with your hands during the process of hanging
the product.
Eng-5
