IEEE-488 Commands
Copyright© Itech Electronic
Co., Ltd.
22
Query Syntax
*ESR?
Parameters
None
Return Parameters
<NR1>
Relevant Command
*CLS *ESE *ESE? *OPC
*IDN?
This command can read information about power supply. The returns
parameter contains 4 segments divided by comma.
Query Syntax
*IDN?
Parameters
None
Return Parameters
<AARD>
Example
ITECH,IT5102,KN34243232,01.00
*RST
This command reset the power supply to default settings.
Command syntax
*RST
Parameters
None
*SRE <n>
This command can set the parameter of state byte enable register. Setting
parameter can determine which byte value of state byte register is 1 and the
byte will set RQS of state byte register to 1. Bit definition of state byte enable
register is as the same as the state byte register.
Command syntax
*SRE <NRf>
