Configuration Commands
Copyright© Itech Electronic
Co., Ltd.
15
Default Value
ON
Example
CHAN:VOLT 0
Query Syntax
CHANnel:VOLTage[:STATe]?
Return Parameters
0 | 1
Relevant Command
CHAN:VOLT?
CHANnel:RESistance[:ENABle] <bool>
This command sets the internal resistance measurement function to enable or
disable for corresponding channel. 0: disable, 1: enable.
Command syntax
CHANnel:RESistance[:STATe] <bool>
Parameters
0|1|ON|OFF
Default Value
ON
Example
CHAN:RES 0
Query Syntax
CHANnel:RESistance[:STATe]?
Return Parameters
Channel number: which consist of group number and channel number. Take
the 1208 for an example, 12 is the slave number, and 8 is the channel number.
If channels are belonged to master instrument, will be displayed as 8, the
master number is 0 and can be omit.
5102
：
1-16
，
101-116 ---
，
1601-1616
5102E
：
1-8
，
101-108 ---
，
1601-1608
Relevant Command
CHAN:RES?
