Iteaduino PLUS with A10 Core Manual
iteadstudio.com
21
st
August, 2013
10
Tech Support: [email protected]
Micro-SD card with system written
If you purchase 8G Micro-SD card from ITEAD, it will have the latest system written; if you already
have a Micro-SD card, you can download ITEAD OS mirror package from the Internet and write it to
the card according to the instructions.
Mouse and keypad with USB interface
ITEAD OS supports most of the keypads and mouse with standard USB interfaces.
Connecting to computer through monitor or FOCA
Iteaduino PLUS supports HDMI output, so you can use the monitor that supports HDMI input or
monitor which supports DVI input via HDMI to DVI adapter cable. Alternatively, under circumstances
without graphical interfaces, you can use FOCA to connect to Iteaduino PLUS, and then log in
command interface with software such as putty/secrutCRT/HyperTerminal.
5V2A charger
When CPU works under large load, voltage loss on USB cable should be considered. If the current is
more than 2A, there will be more than 600mV line loss, and there might be abnormities such as
program running away due to insufficient voltage supply. As power supply from USB port of PC can
only support the system working properly under low load, an external AC ~ DC power supply with
output voltage of a little bit more than 5V is recommended, and the maximum input voltage should
be no more than 6.3V.
Connect all the accessories:
a.
Insert the Micro-SD card loaded with operating system into the socket.
b.
Connect USB keypad/mouse to USB interfaces on Iteaduino PLUS. You can also connect with a USB
HUB if you have one.
